同轴电缆的远距离传输带宽扩展技术

在快脉冲信号测量中,同轴电缆的带宽不能满足信号传输要求。本文从电缆频带的扩展原理入手,着重讨论了传输电缆的无源带宽扩展技术的实现方法,最后给出了一个实际例子供参考。     

电磁干扰自动测量系统

电磁干扰自动测量系统可完成产品诊断测量、环境场测量和基于GJB-151/152标准的有关测量。测量频率范围为14kHz～18GHz,幅度测量精度在30MHz频率以下优于±2.85dB。在30MHz～6GHz范围内优于±3.86dB,在6～16GHz频率范围内优于±4.81dB,在16～18GHz范围内优于±5.06dB。     

混频电路的应用及分析方法

本通过对混频电路的组成，工作原理及分析，阐明了混频电路的学习和分析方法，结合实用电路，说明了混频电路在电子技术及通信领域的广泛应用。     

红外笼模拟外热流方法对空间相机 温度的影响分析

空间相机的热平衡试验中,一般采用红外笼—热流计的闭环控制系统来模拟相机进光口处的外热流。为研究该种热流模拟方法对相机温度场的影响,建立了简化的模型进行分析。分析结果表明,红外热流模拟对相机温度场的影响体现在相机整体温度水平和光学件温度均匀性两个方面。对于有精密控温要求的空间相机来说,这一影响产生的误差是必须考虑的。     

小发动机推力矢量的测量

针对小发动机推力矢量的特点和测量要求 ,在分析二轴转台数学模型的基础上提出了间接测量推力矢量的线性组合法 ,最后给出误差计算公式。通过转台的旋转和伸缩形成不同的试验工况 ,得到测量数据的超定方程组 ,再用最小二乘法解矛盾方程求得推力矢量的方向角和偏移量。经多次试验表明 ,用该方法测量推力矢量参数的不确定度远小于± 5% ,超过了原定技术要求     

星座设计与星际链路的建立

在卫星移动通信系统中 ,若使用 L EO/MEO卫星 ,则其位置相对于地球是时变的 ,卫星之间的相对位置也是时变的。要在星座中建立星际链路(Inter Satellite L inks) ,需要确知卫星的相对位置 ,计算卫星间的方位角和距离。文章在介绍了星座类型和几种星座设计方法的基础上 ,说明了星际链路的空间几何参数关系 ,详细讨论了卫星间的方位角和距离与星座设计的关系 ,并给出了一些有价值的结论。     

月球软着陆的时间最优安全着陆区搜索算法

以时间为最优参数,提出了一种模拟人类在月球软着陆过程中识别障碍物、选择安全着陆点的思维模式,利用高程图寻找安全着陆点的软着陆算法。综合考虑着陆器能容忍的障碍物高度、粗糙度、坡度和着陆器的水平机动距离,根据时间最优设计算法,计算简单、速度快、可靠性高。仿真结果表明了算法的正确性和可靠性。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

Dynamic tensile behavior of AZ31B magnesium alloy at ultra-high strain rates

The samples having {0001} parallel to extruding direction(ED) present a typical true stress–true strain curve with concave-down shape under tension at low strain rate. Ultra-rapid tensile tests were conducted at room temperature on a textured AZ31 B magnesium alloy. The dynamic tensile behavior was investigated. The results show that at ultra-high strain rates of 1.93 · 102 s 1and 1.70 · 103 s 1, the alloy behaves with a linear stress–strain response in most strain range and exhibits a brittle fracture. In this case, {10-12} 10-11 extension twinning is basic deformation mode. The brittleness is due to the macroscopic viscosity at ultra-high strain rate, for which the external critical shear stress rapidly gets high to result in a cleavage fracture before large amounts of dislocations are activated. Because {10-12} tension twinning, {10-11} compressive twinning,basal a slip, prismatic a slip and pyramidal c + a slip have different critical shear stresses(CRSS), their contributions to the degree of deformation are very differential. In addition,Schmid factor plays an important role in the activity of various deformation modes and it is the key factor for the samples with different strain rates exhibit various mechanical behavior under dynamic tensile loading.     

三维控制翼周围粘性分离流动的数值模拟

本文首先分析了中心型隐式格式和迎风型隐式格式的优缺点,在此基础上发展了一种自由参数可确定的反扩散隐式格式。用此格式计算了绕三维控制翼的层流和湍流分离流动。出发方程是三维简化N-S方程,用Baldwin-Lomax湍流模型。结果表明,这种隐式格式效率高,能满意地刻划流场。